Friday, June 27, 2014

HG Red Frame (Flight Unit) - WIP 14

In the previous post, we saw how the flight unit was attached to the RF with a few action poses and all the standard weapons were shown, I will show the RF with the Caletvwich as discussed in Part 10 and the additional 2 katanas which was reviewed in Part 11.
Before we go into that, let's change the RF's front section of the helmet first. All we need to do is to replace the existing V fin and front helmet with the ones supplied with the Caletvwich kit.
The parts to be replaced
The assembly is a simple process. Attach the front helmet on, attach the pink V fin and finally the red V fin on top of the pink. Once completed, the RF should look like this:



First up are the 2 extra katanas which I got from the Gunpla Builders Parts HD: MS Launcher 01. Both scabbard of the katanas are painted a different color from the standard. Wanted to show that it is an additional weapon which the RF has up his sleeves when the going gets tough. Some photos of the RF with the 2 katanas.



Now to show some photos of the RF with the Caletvwich:





The RF duel wielding the Caletvwich:





If any of you are curious on how the additional katanas were assembled to the flight pack, it is a simple process. No modding required. All you need to do is to remove the wings at the side of the flight unit. After that there will be a hole where the peg on the katana can fit nicely inside.

The best part is that you can adjust the katanas position individually. Depends if you want it near the shoulder if you want to pose the RF reaching for the katanas or can position is in a downward pose. Next post will be the final post where I will lay out all of the RF's arsenal and reveal his new name.

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...